All automatic drilling machines complete the entire operation process by themselves according to the set programs or instructions.
It greatly improves the engineering quality and power, and is a special automatic aircraft with a high degree of automation.
All automatic drilling machines are mainly protected by mechanical parts and systems:
1. Protection of mechanical parts:
(1). Check the clearance between the adjusting nuts in time to ensure the axial stiffness and reverse transmission accuracy.
(2). Check in time whether the connection between the bed and the screw bracket is loose, and whether the relevant parts are damaged.
(3). Renew the grease in time and clean the old grease on the screws every six months. Oil the machine once a day before operation.
(4). Replace damaged protective equipment in time, and pay attention to prevent dust and debris from entering the protective cover.
2. The system also includes CNC system and air control system:
(1) and the protection of the numerical control system:
a. Operating procedures and daily protection standards must be strictly followed.
b. Avoid dust entering the CNC equipment: Dust and metal powder can easily cause the insulation resistance between components to drop, and even damage the components.
c. Clean the cooling and ventilation system of the CNC cabinet on time at 4 o’clock. Replace the battery regularly
d. Frequently monitor the grid voltage of the CNC system.
e. Frequently run the drill through a warm-up sequence or power up the CNC system.
f. Protect spare circuit boards.
(2) pneumatic system protection
a. Continue to keep the system tight.
b. Check the oil supply to the oil mist device in the system on time. Recommended reading: Automatic Drilling Machine
c What are the advantages. Remove impurities and moisture from compressed air at any time.
d. Pay attention to the pressure of air conditioner operation in time.
Post time: Mar-04-2022