How to lubricate the embossing machine during use? The surface embossing machine adopts touch screen man-machine dialogue to set various welding parameters, which is easy to use; Simple and good welding quality. Next, let’s follow Longgang Xinxin Printing Machinery Co., Ltd. to see the lubrication method during the use of the embossing machine. I hope it will be helpful to the small partners in need.
The temperature adjustment gear is directly marked on the panel of the surface embossing machine, which can be controlled at 0°C-400°C at will, and automatically maintains a constant temperature after setting the temperature. The surface embossing machine adopts PLC (Programmable Logic Controller), and the feeding, hot-melting, curing time and automatic and manual functions can be set in the man-machine interface, which is easy to operate. The surface embossing machine adopts a double-button start-up design to process safety gratings to improve practical safety. The surface embossing machine heats up with low power consumption, and the digital temperature controller controls the temperature so that the temperature difference does not exceed ±3 degrees. Surface embossing machine automatic punching machine cycle time is adjustable, electronic control can automatically and continuously punch, used in the field of mechatronics.
When the surface embossing machine is operating, the correct control of temperature and pressure is very important equipment. When heating for embossing and setting, the problem can be controlled according to the material characteristics. Do not use ultra-high temperature for embossing three-dimensional printing to prevent discoloration or deformation of the printed product. Avoid The roll body is deformed due to the influence of high temperature. Do not blindly increase the pressure for the pursuit of high-definition embossing effect, so as to avoid deformation of the pressure roller due to excessive pressure. It is best to run at low speed during trial production. After familiarizing with the performance of the machine, the production speed can be gradually increased, which can better ensure the production safety and the embossing quality of the product. In order to prevent the deformation of the pressure roller, the pressure roller must be released from the pressure when it is stopped for a long time.
Pay attention to the relationship between the speed, temperature and pressure of the surface embossing machine and the embossing effect. Generally speaking, in e-commerce, when the machine speed is slow, the temperature is high, and the pressure is high, the embossing effect is relatively good, but it must be moderate, otherwise, it will affect the embossing quality of the product. For the typesetting of materials with high tightness and good stiffness, the machine pressure can be appropriately larger.
When the pressure roller is obviously worn and deformed, it can be ground to make it reach the center degree required for uniform pressure. When pressing different patterns to replace the pattern rollers, use a belt or a soft and flexible rope to cover the rollers to balance and lift. Do not use iron rollers or other hard objects to pry, pad and hit the surface of the pattern roller to prevent damage to the roller pattern. During the use of the surface embossing machine, attention should be paid to adding lubricating oil regularly. Good lubrication can improve the performance and life of the surface embossing machine and ensure the embossing quality of the product.
The above is the introduction of the lubrication method during the use of the embossing machine. Customers who have needs for the embossing machine can contact Xuzhou Tenglong Machinery Co., Ltd. We look forward to establishing a long-term and stable cooperative relationship with you. If you have any questions, please contact us. , there will be professional staff here to answer your questions.
Post time: Jan-11-2022